Unfortunately the paypal system does not properly calculate the shipping costs for International sales. While we are happy to service all of our International customers, you will have to contact us PRIOR to your purchase for the correct cost calculation.
Free shipping, when offered , is for USA customers ONLY.
International sales entered here WITHOUT proper shipping quotes will be refunded
POWDER COATED WHEEL SALE Speedster and Spyder sizes. 4 and 5 bolt pattern. SILVER POWDER COAT.
ATTENTION ALL POTENTIAL WHEEL CUSTOMERS - READ THIS PLEASE
It has come to our attention that PAYPAL is NOT properly calculating the shipping cost of these wheels. So we have changed the process.
Shipping is by either USPS or by UPS and can be quoted on request.
However, using the Paypal button will add $25.00 per wheel for shipping. If you are within 250 miles of South Bend, IN. you might want to call in your order, as shipping will be lower. If, however, you are not within 250 miles of us the $25.00 per wheel shipping rate is less than the actual cost, so just go with it. Thanks.
International is considerably more expensive, therefore PLEASE do not use Paypal for this transaction, rather email us directly for a quote. International shipping is not cheap, and may exceed the cost of the wheels in certain cases.
5.5" X 15" 25MM OFFSET. 5 x 205mm bolt pattern. SPEEDSTER or SPYDER
Temporarily OUT OF STOCK
RB550-5.5 powder coated steel wheel
Part # 550-5.5 = 5.5” W X 15” , 5 BOLT 25MM OFFSET - FITS REAR OF SHORT AXLE SPYDER AND ALL 4 OF SHORT AXLE SPEEDSTER. BASED ON BECK PRODUCT FITMENT. COMMONLY REFERRED TO AS "WIDE FIVE'S".
NOTE: These high quality steel wheels come with the hubcap clips installed. These wheels are powder coated in silver color.
SPECIAL NOTE: The manufacturer's marks and production dates are stamped on the front side lip. See the close-up photo at the bottom of the page please.
Do NOT order using PAYPAL if you are NOT in the USA, as the shipping quoted is way wrong.
4.5" X 15" 45MM OFFSET. 5 x 205mm bolt pattern. Powder coated Silver.
RB550-4.5
Part # 550 - 4.5 = 45MM OFFSET - MADE FOR THE FRONT 550 SPYDER.
15MM MORE OFFSET THAN THE OLD MANGELS WHEEL SO IT TUCKS THE WHEEL INTO THE WELL A BIT MORE. AVOID RUB. TIGHTER TURN RADIUS.
THE ONLY WHEEL WE KNOW OF THAT CAN BE USED TO AVOID EXPENSIVE WHEEL MODIFICATIONS FOR THE BELOW APPLICATIONS:
USE TO CONVERT A BECK SPYDER FOR WIDE 5 CONVERSION IF YOU HAVE LONG AXLE TRANSAXLES.
ALSO CAN BE USED ON THE REAR OF LONG AXLE SPEEDSTER FOR THE WIDE 5 LOOK AS WELL.
Do NOT order using PAYPAL if you are NOT in the USA, as the shipping quoted is way wrong.
5.5" X 15" 4 X 130mm BOLT PATTERN 25MM OFFSET.
5.5 X 15" 4 BOLT PATTERN
USE ON ALL 4 CORNERS OF A SHORT AXLE SPEEDSTER.. 4 X 130 BOLT PATTERN, BUT WITH 10 HOLE “D” SHAPED HOLES. WHEN USED WITH A HUBCAP THIS WHEEL LOOKS JUST LIKE YOU HAVE THE WIDE 5 BOLT WHEEL
Silver Powder coated.
Stamped on front lip.
Do NOT order using PAYPAL if you are NOT in the USA, as the shipping quoted is way wrong.
PICTURE OF THE STAMPED MARK ON THE WHEEL - FRONT SIDE RIM
TYPICAL STAMP MARKS - FRONT SIDE.
Special Edition, Inc.
119 N. Liberty Drive
Bremen, IN 46506
(574) 546-4656 - shop
Copyright by Special Edition, Inc. All rights reserved. ID-encrypted images. Protected under both U.S. Federal copyright law and international treaties. No component of this site, including text, images and computer code, may be reproduced or copied in any form or by any means--electronic, graphic, digital or mechanical, including photocopying or information storage & retrieval systems--without the express prior written permission of Special Edition, Inc.
NOTICE: www.BeckSpeedster.com®, Beck Spyder®, Beck Speedster® and Chamonix® are all trademarks of Special Edition, Inc.
